MSI X99S MPOWER Manual - Manual (Page 88)

Chapter 3
3-22 BIOS Setup 3-23 BIOS Setup
▶CPU Core/ Ring Voltage Offset [Auto]
Sets the offset value for CPU Core/ Ring voltage. If set to "Auto", BIOS will set these
voltages automatically or you can set it manually. This item appears when “CPU Core/
Ring Voltage Mode” sets to [Offset Mode]/ [Adaptive + Offset]/ [Override + Offset].
▶CPU SA Voltage Mode [Manual Mode]*
Selects the control mode for CPU SA voltage.
[Manual] Allows you to set the voltage manually.
[Offset] Allows you to set the offset voltage and select the voltage offset mode.
▶CPU SA Voltage Offset [Auto]*
Sets the offset value for CPU SA voltage. If set to "Auto", BIOS will set these voltages
automatically or you can set it manually. This item appears when “CPU SA Voltage
Mode” sets to [Offset Mode].
▶CPU SA Voltage [Auto]
Sets the CPU SA voltages. If set to “Auto”, BIOS will set these voltages automatically
or you can set it manually. This item appears when “CPU SA Voltage Mode” sets to
[Manual Mode].
▶XXX Voltage [Auto]*
Sets the voltages related to memory/ PCH. If set to "Auto", BIOS will set the voltage
automatically or you can set it manually.
< Other Setting >
▶CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than needs
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
▶MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
▶DIMMX Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
▶CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
▶CPU Features
Press <Enter> to enter the sub-menu.