MSI H61M-P20 (G3) - Manual (Page 15)

5
MS-7788
reAr PANeL
the rear panel provides the following connectors:
HArdWAre SetuP
this section provides instructions on CPu and memory installation, as well as
jumper settings on the mainboard. While doing the installation, be careful in hold-
ing the components and follow the installation procedures.
CPu & Cooler installation Procedures for LGA55
When you are installing the CPu, make sure that you install the cooler to prevent
overheating. if you do not have the CPu cooler, consult your dealer before turning
on the computer.
introduction to LGA 55 CPu
the surface of LGA 55 CPu. remember to apply some thermal paste on it for
better heat dispersion.
iMPortANt
to reach the 8-channel sound effect, the 7th and 8th channels must be output
from front panel.
the dVi-d & VGA ports only work with integrated Graphics Processor.
*
*
Alignment key
yellow triangle is the Pin  indicator
Alignment key
PS/2 mouse
uSB 2.0 ports
VGA port
LAN
Line-in
Line-out
MiC
PS/2 keyboard uSB 2.0 ports dVi-d port