MSI FM2-A85XMA-E35 - Manual (Page 78)

B-10
AMD RAID
Installng OS on 2.2TB RAID
If you plan to nstall 64bt operatng system on a RAID volume greater than 2.2TB, you
can only manually create and load the RAID array n EFI shell.
WARNING
Create rad array wll erase all the data stored on hard drves! Make sure to back up your
files! There s no way to reverse the process!
The followng descrbes an example of how to nstall Wndows 7 64bt on a RAID 0
volume greater than 2.2TB.
1. Access BIOS → SETTING → Advanced → Integrated Perpherals submenu.
2. Set the “SATA Mode” opton to “RAID Mode”.
3. Set the “Board SATA RAID ROM” opton to “UEFI DRIVER”.
4. Save and then reboot. Press F11 whle system bootng to access boot devce se-
lectng menu.
5. Select “UEFI: Bult-n EFI Shell” to access the EFI Shell envronment.
6. Type “drvcfg” at the EFI shell prompt, t wll show values of current configurable
tems.
Shell> drvcfg
Configurable Components
Drv[40] Ctrl[B2] Lang[eng]
7. Refer to the value n [Drv] and [Ctrl], Type example “drvcfg -s 40 b2”.
Shell> drvcfg -s 40 b2
8. The RAID ROM wll be loaded.