MSI Z68A-GD80 (G3) Manual - Manual (Page 52)

2-6
BIOS Setup MS-7672
Chapter 2
BIOS Setup MS-7672
Chapter 2
Advanced
PCI Subsystem Settngs
Press <Enter> to enter the sub-menu.
PCI Latency Tmer
Controls how long each PCI devce can hold the bus before another takes over.
When set to hgher values, every PCI devce can conduct transactons for a longer
tme and thus mprove the effectve PCI bandwdth.
ACPI Settngs
Press <Enter> to enter the sub-menu.
ACPI Standby State
Specfies the power savng mode for ACPI functon
[S1] Sleep Mode. Hardware remans on.
[S3] Suspend to RAM. Turns off hardware. (Recommended)
Power LED
Configures how the system uses power LEDs on the case to ndcate sleep/
suspend state.
[Sngle] The power LED turns off durng the sleep/suspend mode.
[Dual] The power LED changes ts color to ndcate the sleep/suspend
state.
[Blnkng] The power LED blnks to ndcate the sleep/suspend state.
Integrated Perpherals
Press <Enter> to enter the sub-menu.
Onboard Lan Controller1/ 2
Ths tem allows you to enable/ dsable the onboard LAN controller 1/ 2.
LAN Opton ROM
Ths tem s used to decde whether to nvoke the Boot ROM of the onboard LAN.
Onboard IEEE 1394 Controller
Ths tem allows you to enable/ dsable the onboard IEEE 1394 controller.
SATA Mode
Ths tem s used to specfy RAID/ IDE/ AHCI mode for SATA port.
Important
You cannot swtch between AHCI and IDE f you already have your operatng system
nstalled. If you have nstalled your OS usng AHCI and you clear your BIOS/reset to
default settngs, you wll need to change ths functon back to AHCI to ensure proper
functonalty.
External SATA 6Gb/s Controller Mode
Ths tem s used to specfy operatng mode for external SATA 6Gb/s port.
HD Audo Controller
Ths tem allows you to enable/ dsable the HD audo controller.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶