MSI Wind Board 330 - Manual (Page 30)

En-21
E
n
g
li s
h
4. Cell Menu Introduction : This menu is for advanced user who want to overclock
the mainboard.
Current CPU / DRAM Frequency
These items show the current clocks of CPU and Memory speed. Read-only.
Advance DRAM Configuration
Press <Enter> to enter the sub-menu.
Configure DRAM Timing by SPD
Setting to [Auto] enables DRAM timings and the following related items automatically
to be determined by BIOS based on the configurations on the SPD (Serial Presence
Detect) EEPROM on the DRAM module.
CAS# Latency (CL)
When the Configure DRAM Timing by SPD sets to [Manual], the field is
adjustable. This controls the CAS latency, which determines the timing delay (in
clock cycles) before SDRAM starts a read command after receiving it.
Important
Change these settings only if you are familiar with the chipset.