MSI Wind Board 230 - Manual (Page 41)

3-11
BIOS Setup
USB Controller
This setting allows you to enable/disable the onboard USB controller.
USB Device Legacy Support
Select [Enabled] if you need to use a USB-interfaced device in the operating system.
Onboard LAN Controller
This item is used to enable/disable the onboard 1st LAN controller (Realtek 8111B, the
one next to the USB connector).
LAN Option ROM
This item is used to decide whether to invoke the Boot ROM of the LAN controller.
HD Audio Controller
This setting is used to enable/disable the onboard audio controller.
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
Integrated Peripherals