MSI RS482M4-FD/ILD/IL/L - Manual (Page 48)

3-7
BIOS Setup
If you select [Manual], related information is asked to be entered to the following
items. Enter the information directly from the keyboard. This information should be
provided in the documentation from your hard disk vendor or the system manufacturer.
[Access Mode] The settings are [CHS], [LBA], [Large], [Auto].
[Capacity] The formatted size of the storage device.
[Cylinder] Number of cylinders.
[Head] Number of heads.
[Precomp] W rite precompensation.
[Landing Zone] Cylinder location of the landing zone.
[Sector] Number of sectors.
Drive A
This item allows you to set the type of floppy drives installed. Available options:
[None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].
Halt On
The setting determines whether the system will stop if an error is detected at boot.
Available options are:
[No Errors] The system doesn ’t stop for any detected error.
[All, But Keyboard] The system doesn ’t stop for a keyboard error.