Chapter 3 – MSI H61M-E23 (B3) User Manual

Page 48

Advertising
background image

3-12

BIOS Setup

MS-7680

Chapter 3

BIOS Setup

MS-7680

Chapter 3

DRAM Rato

Ths settng controls the rato of memory frequency to enable the memory to run at df-

ferent frequency combnatons.

Adjusted DRAM Frequency

It shows the adjusted DRAM frequency. Read-only.

DRAM Tmng Mode

Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EE-

PROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the followng

“Advanced DRAM Configuraton” sub-menu to be determned by BIOS based on the

configuratons on the SPD. Selectng [Lnk] or [Unlnk] allows users to configure the

DRAM tmngs and the followng related “Advanced DRAM Configuraton” sub-menu

manually.

Advanced DRAM Configuraton

Press <Enter> to enter the sub-menu.

Command Rate

Ths settng controls the DRAM command rate.

tCL

Ths controls the CAS latency, whch determnes the tmng delay (n clock cycles)

before SDRAM starts a read command after recevng t.

tRCD

When DRAM s refreshed, both rows and columns are addressed separately. Ths

setup tem allows you to determne the tmng of the transton from RAS (row ad-

dress strobe) to CAS (column address strobe). The less the clock cycles, the faster

the DRAM performance.

tRP

Ths settng controls the number of cycles for Row Address Strobe (RAS) to be

allowed to precharge. If nsufficent tme s allowed for the RAS to accumulate ts

charge before DRAM refresh, refreshng may be ncomplete and DRAM may fal

to retan data. Ths tem apples only when synchronous DRAM s nstalled n the

system.

Advertising
This manual is related to the following products: