MSI H61M-E23 (B3) - Manual (Page 50)

3-14
BIOS Setup MS-7680
Chapter 3
BIOS Setup MS-7680
Chapter 3
Important
If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system
stablty and performance. But f you are plagued by EMI, select the value of Spread
Spectrum for EMI reducton.
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the
system wll become less stable. For the most sutable Spread Spectrum value, please
consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght
jtter can ntroduce a temporary boost n clock speed whch may just cause your over-
clocked processor to lock up.
DRAM Voltage
Ths tem s used to adjust the memory voltage.
CPU Features
Press <Enter> to enter the sub-menu.
Hyper-threadng
The processor uses Hyper-Threadng technology to ncrease transacton rates and
reduces end-user response tmes. The technology treats the two cores nsde the
processor as two logcal processors that can execute nstructons smultaneously. In
ths way, the system performance s hghly mproved. If you dsable the functon, the
processor wll use only one core to execute the nstructons. Please dsable ths tem
f your operatng system doesn’t support HT Functon, or unrelablty and nstablty
may occur.
Important
Enablng the functonalty of Hyper-Threadng Technology for your computer system
requres ALL of the followng platform Components:
CPU: An Intel ® Pentum ® 4 Processor wth HT Technology;
Chpset: An Intel ® Chpset that supports HT Technology;
BIOS: A BIOS that supports HT Technology and has t enabled;
OS: An operatng system that supports HT Technology.
For more nformaton on Hyper-threadng Technology, go to:
www.ntel.com/nfo/hyperthreadng
•
•
•
▶
▶
▶
•
•
•
•