Front usb connector: jusb2, jusb3, Important, Chassis intrusion switch connector: intruder – MSI MS-96C8 Series User Manual
Page 27
2-13
Hardware Setup
Front USB Connector: JUSB2, JUSB3
This connector, compliant with Intel
®
I/O Connectivity Design Guide, is ideal for con-
necting high-speed USB interface peripherals such as
USB HDD, digital cameras,
MP3 players, printers, modems and the like.
PIN
SIGNAL
PIN
SIGNAL
1
VCC
2
VCC
3
USB0-
4
USB1-
5
USB0+
6
USB1+
7
GND
8
GND
9
Key (no pin)
10
NC
Pin Definition
Important
Note that the pins of VCC and GND must be connected correctly to avoid
possible damage.
USB 2.0 Bracket
(Optional)
Chassis Intrusion Switch Connector: INTRUDER
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
INTRUDER
2
CINTRU
GND
1
1
2
9
10
JUSB2/3
PDF created with pdfFactory Pro trial versi