MSI MS-96C8 Series - Manual (Page 28)

2-14
MS-96C8 Server Board
SPI Flash ROM Connector: J2
This connector is used to flash SPI flash ROM.
Pin Description Pin Description
1 +3.3V DUAL 2 +3.3V DUAL
3 SPI_MISO 4 SPI_MOSI
5 SPI_CS0# 6 SPI_CLK
7 GND 8 GND
9 SPI_HOLD# 10 NC
Pin Definition
I2C Bus Connector: JSMBUS1
This connector, known as I 2 C, is for users to connect System Management Bus
(SMBus) interface.
PIN SIGNAL
1 SMB Clock
2 SMB Data
3 PS Alert
4 GND
5 +3.3V
Pin Definition
JSMBUS1
5 1
1
J2
2
9
10
ME Enable/Disable Header: JGPIO33
This connector is provided for factory use only.
JGPIO33
GND GPIO33
1
PDF created with pdfFactory Pro trial version www.pdffactory.com