MSI MS-9638 series - Manual (Page 78)

C-7
SCSI BIOS
on-at-a-time during bootup, reducing the load on the computer ’s power supply.
Setting options: [Yes], [No].
BIOS Multiple LUN Support
Select Yes when any SCSI device has multiple logical units. Setting options:
[Yes], [No].
Include in BIOS Scan
Selecting [Yes] allows the SCSI controller to control the SCSI device with its
SCSI ID. W hen set to [No], the SCSI controller does not control the specified
SCSI device by not scanning for the SCSI ID during bootup, but the boot time will
be decreased. Setting options: [Yes], [No].
Advanced Configuration
Press <Enter> to enter the sub-menu screen for advanced configuration.
Reset SCSI Bus at IC Initialization
Selecting Enabled will reset the SCSI bus the first time the SCSI controller is
initialized. Setting options: [Enabled], [Disabled].
Display <Ctrl><A> Message During BIOS Initialization
W hen enabled, the message
“Press <Ctrl><A> for SCSISelect(TM) Utility” ap-
pears on the screen during bootup. If disabled, the message does not show up,
but you can still press <Ctrl> + <A> key combination to enter the SCSI BIOS
utility. Setting options: [Enabled], [Disabled].
Extended Int 13 Translation for DOS Drives > 1 GByte
The field allows SCSI hard disk drives greater than 1 GB to use a translation
scheme of 255 heads, 63 sectors per track. Setting options: [Enabled], [Disabled].
Reset SCSI Bus at IC Initialization ...................................................Enabled
Display <Ctrl><A> Message During BIOS Initialization .........Enabled
Extended Int 13 Translation for DOS Drives > 1 GByte ............Enabled
POST Display Mode .............................................................................Verbose
SCSI Controller Int 13 Support .........................................................Enabled
Domain Validation................................................................................Enabled
Support Removable Disks Under Int 13 as Fixed Disks ...........Disabled
BIOS Support for Bootable CD-ROM .............................................Enabled
Advanced Configuration
Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled
9638v1.0-Appendix C(SCSI BIOS).p65 2006/11/9, 下午 03:33 7