MSI MS-96D2 - Manual (Page 17)

Hardware Setup
▍
MS-96D2
2-3
Hardware Setup
▍
MS-96D2
cpu (c
entraL
p
roceSSing
u
nit
)
When you are nstallng the CPU, make sure to nstall the cooler to prevent over-
heatng. If you do not have the CPU cooler, consult your dealer before turnng on
the computer.
For the latest nformaton about CPU, please vst http://www.ms.com/ndex.
php?func=cpuform2
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure the
cooling fan can work properly to protect the CPU from overheating. Make sure
that you apply an even layer of thermal paste (or thermal tape) between the CPU
and the heatsink to enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug the
power supply’s power cord from the grounded outlet first to ensure the safety of
CPU.
Overclocking
This mainboard is designed to support overclocking. However, please make
sure your components are able to tolerate such abnormal setting, while doing
overclocking. Any attempt to operate beyond product specifications is not
recommended. We do not guarantee the damages or risks caused by inadequate
Introduction to LGA 1156 CPU
The pn-pad sde of LGA 1156 CPU. The surface of LGA 1156 CPU. Remem-
ber to apply some thermal paste on t for
better heat dsperson.
Alignment Key
Yellow trangle s the Pn 1 ndcator
Alignment Key
Yellow trangle s the Pn 1 ndcator