MSI MS-96D2 - Manual (Page 28)

2-14
Hardware Setup
▍
MS-96D2
Hardware Setup
▍
MS-96D2
2
INTRUER_N GND
1
Chassis Intrusion Connector: JCASE1
Ths connector connects to the chasss ntruson swtch cable. If the chasss s
opened, the chasss ntruson mechansm wll be actvated. The system wll re-
cord ths status and show a warnng message on the screen. To clear the warn-
ng, you must enter the BIOS utlty and clear the record.
I2C Bus Connector: JSMBUS1
Ths connector, known as I2C, s for users to connect System Management Bus
(SMBus) nterface.
5 1
IPMB Connector: JIPMB1
Ths connector s used to connect the IPMB (Intellgent Platform Management
Bus) SMBus.
1
3
PIN SIGNAL
1
2
3 SMB Data
GND
SMB Clock
PIN SIGNAL
1
2
3
4
5 SMB Clock
SMB Data
PS Alert
GND
+3.3V