MSI MS-9297 - Manual (Page 50)

3-14
Manboard Setup
▍
MS-9297
Manboard Setup
▍
MS-9297
J
umper
Clear CMOS Jumper: JCLR_CMOS1
There s a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatcally boot OS every tme t s turned on. If you want to clear the system
configuration, set the jumper to clear data.
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the mainboard.
BIOS Recovery Jumper: JRECOVERY1
Users can short connect pn#2-3 to recover the system BIOS wth a Recovery
Floppy. When the system s done wth the job, the buzzer wll beep to remnd the
user to set the jumper to ts normal state (pn#1-2 short connected).
Normal or Clear
by BMC (default)
1
Clear Data
1
JCLR_CMOS1
1
Normal (default)
1
BIOS recovery
1
JRECOVERY1
1