MSI MS-96E3 - Manual (Page 31)

Hardware Setup
MS-96E3
2-15
Hardware Setup
MS-96E3
Fan Power Connector: CPU_F1, SYS_F1, SYS_F2
The fan power connectors support system coolng fan wth +12V. When con-
nectng the wre to the connectors, always note that the red wre s the postve
and should be connected to the +12V; the black wre s Ground and should be
connected to GND. If the manboard has a System Hardware Montor chpset
onboard, you must use a specally desgned fan wth speed sensor to take ad-
vantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at processor’s official website or
consult the vendors for proper CPU cooling fan.
PIN SIGNAL
1
2
3
4 GND
+12V
Sensor
Control 1 4
1
4
CompactFlash Socket: CFCARD1
Ths socket s provded for CompactFlash (CF) cards.