Chassis intrusion connector: jchassis1, Serial ata ii connector: sata1 ~ sata3, Important – MSI AM-780E V1.1 User Manual
Page 15
Advertising
2-7
MS-9858
c
onnectorS
Chassis Intrusion Connector: JCHASSIS1
This connector is provided to connect the chassis intrusion switch cable. If the
chassis is opened, the chassis intrusion mechanism will be activated. The sys-
tem will record this status and show a warning message on the screen. To clear
the warning, you must enter the BIOS utility and clear the record.
Serial ATA II Connector: SATA1 ~ SATA3
This connector is a high-speed Serial ATA II interface port. Each connector
can connect to one Serial ATA II device.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data
loss may occur during transmission.
SA
TA1
SA
TA2
SA
TA3
1
2
CHASIS
GNd
Advertising