MSI AM-780E V1.1 - Manual (Page 23)

2-15
MS-9858
J
uMper
LVdS Power Selection Jumper: JVdd1
Use this jumper to specify the operation voltage of the LVDS interfaced flat panel.
1
1
+3.3V
1
+5V
1
+12V
Clear CMOS Jumper: JCMOS1
There is a CMOS RAM onboard that has a power supply from an external bat-
tery to keep the data of system configuration. With the CMOS RAM, the system
can automatically boot OS every time it is turned on. If you want to clear the
system configuration, set the jumper to clear data.
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the mainboard.
Keep Data Clear Data
1 1 1