NITECORE SRT7 - Manual

User Manual
Features
· Purpose-designed for law enforcement, hunting and tactical
applications.
· The world’s first line of flashlights to feature third generation SSR
(smart selector ring) technology
· Smoothly and rapidly select brightness levels and function by rotating a
smart selector ring
· Utilizes the latest CREE XM-L (XM-L2 T6) LED for a maximum output of
up to 960 lumens
· Second generation of ‘Crystal Coating Technology’ along with ‘Precision
Digital Optics Technology’ provide extreme reflector performance
· Boasts a peak beam intensity of 23,256cd and a throw distance of up to
308 meters (ANSI FL1)
· High efficiency circuit board provides up to 200 hours runtime on lowest
output level
· Equipped with unique multi-colored (red, green and blue) tactical /
signaling lights
· Infinite brightness adjustment from 0 to 960 lumens
· Six rapidly switchable functions to select from
· Multi-functional power indicator light displays low battery status
· Patented spring-loaded impact absorption mechanism with reverse
polarity protection
· Stainless steel titanium-plated two-way clip
· Stainless steel retaining ring protects core components from damage
· Toughened ultra-clear mineral glass with anti-reflective coating
· Constructed from aero grade aluminum alloy
· Robust HAIII military grade hard-anodized
· Waterproof in accordance with IPX-8 (two meters submersible)
· Impact resistant to 1.5 meters
· Tail stand capability
Dimensions
Length: 158mm (6.22”)
Head diameter: 40 mm (1.57”)
Tube diameter: 25.4mm (1”)
Weight: 173g (6.1oz)(without battery)
Accessories
Quality holster, removable clip, tactical ring, lanyard, spare tail cap button
and spare O-ring
Battery Options
NOTE:
1. Ensure batteries are inserted with the positive (+) end pointing to the
head. The SRT7 will not operate with incorrectly inserted batteries.
2. Please do NOT light directly to the eyes, which will hurt the eyes.
Switching ON/OFF
To switch ON: Press the button on the tailcap until a “click” is heard.
To switch OFF: Press the button on the tailcap a second time until a
“click” is heard.
Momentary Illumination
Momentary illumination can be achieved by switching the flashlight off
and then half pressing and holding the tail switch. Release switch to turn
the light off.
Adjusting Output
With the light turned on, slowly rotate the Smart Selector Ring (adjacent
to the bezel) in a counter-clockwise direction to cycle through the
following brightness levels: beacon -> police warning signal -> blue mode
-> green mode -> red mode -> standby mode -> infinite brightness modes
-> turbo mode -> strobe mode. These modes may be cycled through in
reverse by rotating the Smart Selector Ring in a clockwise direction.
Thanks for purchasing NITECORE!
Warranty Service
All NITECORE® products are warranted for quality. DOA / defective
products can be exchanged for replacement through a local
distributor/dealer within the 14 days of purchase. After 14 days, all
defective / malfunctioning NITECORE® products will be repaired free of
charge for a period of 18 months from the date of purchase. After 18
months, a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts. The
warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
To guarantee a swift and effective customer service, Nitecore suggest
you to contact the point of purchase for assistance.
For the latest information on NITECORE® products and services, please
contact your national NITECORE® distributor or send an email to
[email protected]
The Nitecore official website shall prevail in case of any product data
changes.
®
ALL-ROUND Flashlight Expert
NITECORE (SYSMAX) is a member of PLATO, participating in and
helping to develop the ANSI/NEMA FL1 standard of measurement.
Product testing data is in accordance with these internationally
recognized scientific standards.
Note: When using the SRT7 in infinite brightness mode, runtime will
increase when lower levels of output are selected. On its lowest setting,
the SRT7 will run continuously for up to 200 hours and on its highest
setting continuously for up to one hour and 45 minutes.
NB:
1. For user safety and to prevent overheating / failure, the SRT7 will
automatically switch to high mode after twenty minutes of use in Turbo
mode. Slowly rotate the Smart Selector Ring or press the tail switch
again to reactivate turbo mode when needed.
2. When the SRT7 is switched on standby mode, it will consume small
amounts of power to maintain the settings in the MCU (micro control
unit) but appear to be turned off. The power indicator on the light head
will blink once every two seconds to indicate the SRT7 is in standby
mode and to act as a locator.
Power Tips
1. With the light switched on, the power indicator will blink once every two
seconds when power levels reach 50%.
2. With the light switched on, the power indicator will blink rapidly when
power levels are low.
Changing Batteries
When the power indicator blinks rapidly it means the batteries need to be
replaced. Alternatively if the light becomes dim or unresponsive to
adjustment this also indicates batteries need to be replaced.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.
NOTICE
The above data has been measured in
accordance with the international
flashlight testing standards
ANSI/NEMA FL1 using one x 3.7V
2600mAh Nitecore 18650 battery and
2 x 3V 1550mAh Nitecore CR123
batteries under laboratory conditions.
The data may vary slightly during
real-world use due to battery type,
individual usage habits and
environmental factors.
* Infinite brightness adjustment varies
from 0.1 to 960 lumens and is
manually adjusted by rotation of the
Smart Selector Ring. Subsequently,
runtimes will vary anywhere from 105
minutes to 200 hours depending on
chosen level of output.
Battery Installation
Insert one 18650 battery or two CR123 batteries with the positive pole
pointing forward (toward the light head).
SIZE Nominal voltage Compatible
Primary Lithium battery CR123 3V Y (Recommended)
18650 Rechargeable Li-ion battery 18650 3.7V Y (Recommended)
Rechargeable Li-ion battery RCR123 3.7V Y
Output & Runtime
TURBO
LUMENS
960*
1 h 45 min
1 h 15 min
LOWER
LUMENS
0.1*
200 h
120 h
308m (Beam Distance)
23256cd
(Peak Beam Intensity)
IPX-8, 2m
(Waterproof
AND Submersible)
1.5m
(Impact Resistant)
2×
CR123
1Ч
18650