AT&T Trimline 205 - Manual (Page 17)

15
In case of difficulty
If there are problems operating this telephone, try the suggestions below.
For Customer Service, visit our website at
www.telephones.att.com
or
call
1 (800) 222-3111
. In Canada, dial
1 (866) 288-4268
. Please
retain your receipt as your proof of purchase.
No dial tone
• Ensure all plugs are connected properly and securely.
• Inspect the line cord connections at the modular jack and on the
telephone.
• Inspect the handset cord connections at both ends.
• Unplug the telephone and connect it to another modular jack. If it still
does not work, and other telephones using the same jack are working,
there is a problem with this telephone.
Telephone does not ring or rings too softly
• Adjust the RINGER switch on the side of the telephone base to a higher
setting.
• If there are other telephones on the same line, try disconnecting some of
them. Having too many telephones connected can create problems such as
low ringer volume or impaired sound quality during calls.
Calls cannot be dialed or are dialed slowly
• Check the dial mode switch and ensure it is set for your type of dialing
service, either TT (touch tone) or DP (dial pulse).
There is a pause during dialing
• When
TONE is pressed, or if TONE is in a memory location, there will be a
pause to allow the set to switch from PULSE to TONE.