How to operate, En g li s h – Nostalgia Electrics CCP810 User Manual

Page 11

Advertising
background image

E

N

G

LI

S

H

9

HOW TO OPERATE

Before first use, clean the inside of the unit by wiping with a moist, non-abrasive

sponge, towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the

inside of the Kettle and be sure it is properly placed in the brackets before starting.

1.

First, find a flat surface near an electrical outlet before starting. Make sure your cord

is away from any water source. It is acceptable to use an extension cord if needed.

2.

Gather your popcorn making supplies: popcorn, seasonings, bucket or bowl for holding

the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon. (Bucket,

Kernel Measuring Cup and Oil Measuring Spoon are included with your unit.)

3.

Make sure Kettle is properly secured in support brackets

and that the Kettle motor is plugged in.

4.

Plug in the appliance while switch is flipped to OFF position.

5.

Turn appliance ON by flipping the switch on the top of the machine (see illustration above

for location of switches). Allow the appliance to run 3-5 minutes to heat up Kettle.

6.

Once Kettle has heated, turn unit OFF before adding ingredients.

7.

Use the Oil Measuring Spoon (1 Tbsp.) supplied with your POPCORN DISPENSING CART

to add up to 4 tablespoons of your favorite popcorn cooking oil to the Kettle. (For every

8-oz. kernels add 4 tablespoons of oil. For best results, vegetable oil is recommended.)

8.

Add up to 8-oz. popcorn kernels to the Kettle using supplied Kernel Measuring Cup.

9.

Close the door and turn unit ON. Turn the light switch to the ON

position to turn on the light and activate the Popcorn Warmer.

10. In no time at all, you will hear the popping begin. Fresh, hot popcorn will

begin to burst out of the flip lids on the Kettle - just like at the theater!

11. Once the popping stops, place the included Bucket inside the center

of the Concession Stand. Turn the Dispenser Handle 180 degrees

clockwise, then 180 degrees counterclockwise. Repeat until desired

amount of popcorn dispenses into your Bucket or serving bowl.

ON / OFF & Light

Crank Handle

Stainless Steel Kettle

Popcorn Dispenser

Dispenser

Handle

Advertising