Introduction, En g li s h – Nostalgia Electrics KRS2100 SERIES User Manual
Page 7
E
N
G
LI
S
H
5
INTRODUCTION
To ensure that your KEGORATOR™ works to the maximum efficiency for which it was
designed, keep it in a location where there is proper air circulation and electrical outlets.
Choose a location where the KEGORATOR™ will be away from
heat and will not be exposed to direct sunlight.
•
The KEGORATOR™ is designed for indoor use only. It should not be used outdoors.
•
The KEGORATOR™ is designed to be freestanding and should
not be placed in a built-in or recessed area.
•
The KEGORATOR™ comes with a 2.5 lb. CO2 bottle, which should
be able to dispense four 15 gallon kegs of beer.
•
KEGORATOR™ capacity: 4.6 cu. ft.
•
KEGORATOR™ unit dimensions: L 20.25" x W 25.75" x H 48.50"
•
The following dimensions are recommended for clearances around the KEGORATOR™:
Sides …………………… ¾” (19 mm)
Back ……………………. 1” (25 mm)
•
KEGORATOR™ unit weight: 77.6 lbs
Compatible Keg Types
The KEGORATOR™ can hold one Full Size Keg, or one Pony Keg, or
two 5-Gallon Kegs. DOES NOT fit non-standard keg sizes.
NOTE: Keg Coupler fits D-Sankey Keg Valves. Attaching
the Keg Coupler will add height to the Keg.
13.5”
15.5”
9”
15.5”
23”
23”
¼ Barrel Pony Size
(7-8 Gallons)
5 Gallon D System
½ Barrel Full Size
(14-16 Gallons)