Cooking, En g li s h – Nostalgia Electrics RMO400 SERIES User Manual
Page 15
E
N
G
LI
S
H
13
COOKING
During the cooking cycle, press and hold the POWER button to show the current cooking
power. When you release the POWER button, it will return to show the remain cooking time.
During cooking, the cooking time can be increased.
1.
Within 0-5 minutes of the cooking cycle, pressing the PROGRAM DIAL
will add 10 seconds to the cooking cycle for each press.
2.
In 5-10 minutes of the cooking cycle, pressing the PROGRAM DIAL will
increase the cooking time by 30 seconds for each time it's pressed.
3.
In 10 minutes to 60 minutes of the cooking cycle, pressing the PROGRAM
DIAL will increase the cooking time by 1 minute for each time pressed.
You can also increase the cooking time by turning the PROGRAM DIAL clockwise.
To reduce the cooking time, turn the PROGRAM DIAL counter-clockwise.
MULTI-SEQUENCE COOKING
You can program up to four separate cooking sequences for each cooking
program. This is useful if you need to cook something at different power and
time settings (ex. 10 minutes at 100 P, 10 minutes at 80 P, 5 minutes at 20 P).
The maximum time for each cooking sequence is 60 minutes.
1.
First, select the power level by pressing the POWER button. Then use
the PROGRAM DIAL to set the desired cooking time for that sequence.
You must select the time or you cannot go on to the next step.
2.
Press the POWER button again to add another sequence. Once
programmed correctly, the microwave will beep two, three or four times
noting that it is ready to begin programming the next sequence.
3.
After you have set the desired number of sequences,
press the PROGRAM DIAL to start cooking.
DELAYED START
1.
After selecting a cooking program and cooking time, while LED Display is in clock
mode, press & hold the DELAY/CLOCK button for five seconds. It will go into the delayed
start function which allows you to select the time that you want to start cooking. The
number(s) to the left of the ":" will flash, but the numbers to the right of the ":" will not.
2.
Turn PROGRAM DIAL clockwise or counter-clockwise to change the hour. Press DELAY/
CLOCK button again to set the minutes. The numbers on the right side of the ":" will
flash, and the number(s) on the left hand side of the ":" for the hour will not.
3.
Turn the PROGRAM DIAL clockwise or counter-clockwise to change the
minutes. Once you have finished selecting the time you want to start
cooking, press the DELAY/CLOCK button to confirm. Your selected cooking
program will now begin automatically at the time you have set.
4.
If you have programmed the delayed start cooking time correctly, the
time on the LED Display will flash. The flashing will stop once the clock
has reached the time you have programmed for cooking.
5.
If you want to check the time that you have preset for cooking, press and hold the
DELAY/CLOCK button. The time that you have selected will be displayed. When you
release the DELAY/CLOCK button, the LED Display will go back to CLOCK mode.