Axis Communications Camera Station - Manual (Page 23)

23
AXIS Camera Station - How to...
Enabled - The Enabled box should be checked. Recordings and Live View
are not possible from this device, if this box is not checked
4. A valid administrator user name and password are required to access and
configure Axis network cameras and video encoders.
Master Credentials is the default user name and password to access a
device and can be set under the menu item
Options > Set Master
Credentials. You also have the option of using specific credentials for a
device. In this case, check the radio button
Use specific credentials and
enter the specific user name and password.
5. Click OK to save.
Create views
Create a new view group
In Live View customize your own view layout or share views with other users.
1. Right-click in My Views or Shared Views under View Groups in the
Live View workspace.
2. Choose Add View Group from the pop-up menu.
3. Enter an appropriate name for the group.
4. Click
OK to save and close the dialog.
To add a Map, Sequence or Split view follow the instructions Create a Map,
Create a Sequence or Create a Split View.
Create a split view
1. Right-click on My Views, Shared Views or a created view from the Live View workspace and choose Split View
from the pop-up menu.
2. Enter a descriptive name and choose a layout from the drop-down list.
3. Drag-and-drop cameras, views and maps to the desired camera views into place.
You can define a frame in the view as a Hotspot that will automatically load the view from a camera when it’s clicked on and
it receives the Live View of a camera that is defined in Event Configuration under Alarm Action, for more information refer
to the help pages. This is particularly useful for asymmetric views with one large view frame and a number of smaller views.
The large view frame is typically defined as the hotspot. To define a hotspot click in the desired section of the view and click
Set Hotspot.
4. Click OK to save settings and close dialog.