Axis Communications Camera Station - Manual (Page 30)

30
AXIS Camera Station - How to...
Initial State
Output ports can be set to an initial state upon startup and when AXIS Camera Station
establishes contact with the camera.
Check ‘ On startup set to’ to enable setting the initial state of the output port and
choose the initial state of the Output port from the drop-down list. The names for the
states were defined under
Names.
Set up schedules
Timetables can be set up to be used in Event Configuration Wizard and Recording Settings. Once a schedule has been entered,
it can be reused as often as necessary. On special dates, for example public holidays, special schedules can be used. Follow
these steps to set up a schedule:
1. Navigate to Configuration > Schedules from the menu.
2. Click Add to open the Schedule Editor.
3. Enter a descriptive name for the schedule.
4. Click and drag on the timelines to define intervals. A blue bar means the
schedule is on while white means the schedule is off.
5. To use a different schedule for special dates, click Override.... Select the special dates and click Edit... to set up
the schedule.
6. Click OK to save.