Silent Call BWR412-SS - Manual (Page 4)

Fire Smoke Detector Supervision
If the smoke detector or fire transmitter are activated or if there is a problem with the operation of either unit the fire
Icon will blink 1 time if detector 1 is in fault, blink 2 times if detector 2 is in fault, blink 3 times if detector 3 is in
fault and blink 4 times if detector 4 is in fault.
The above process is called “supervision” which means there is a radio signal sent from the smoke detector or fire
transmitter to the receiver intermittently and if that signal is broken because of a problem, it turns on a fire icon to
alert you and flashes a number of times to tell you which unit is not working.
Erase memory
(Performing an erase will remove all learned transmitters codes from your Communicator)
 With the Communicator Receiver in the Communicator Port, press and hold the learn button on the
Communicator port. (see photo on page 1)

All lights on the receiver will come on immediately and after 5 seconds all lights except one go out,
continue to hold the learn button.

After 7 seconds all of the lights will scroll back and forth across the receiver.

Release the program button and all previously learned transmitter codes will have been successfully erased.
Optional Accessories
Optional accessories for the Communicator receiver include:

3 pack of protective rubber skins –Model # Skins

USB charging set that includes a USB cable, Car Charger and Wall Outlet Charger-Model # USB-12
 Replacement leather Pouch-Model # LP-12

Bed Vibrator, Model # VIB-PJ
Product Specs
Frequency: 418 MHz
Main Power: Input AC 120v Output 16VDC 1.12A, 18W
Port Battery Backup: 12 VDC, 800 mAh
Receiver Batteries: (2) AAA rechargeable Batteries
Current Draw: Idle 15 mA, Alert Condition – all alert mechanisms active 150 mA.
Technical Support
For technical support on this or any other Silent Call product, please feel free to contact us. You can reach us by
phone at 800-572-5227 (voice or TTY) or by Email at [email protected] .
Limited Warranty
Your Communicator is warranted to be free of defects in material and workmanship for five years from the date of initial
purchase. During that time, the unit will be repaired or replaced free of charge when shipped prepaid to Silent Call
Communications. This warranty is void if the defect is caused by customer abuse or neglect. Batteries are not warranted.