Sioux Chief Chase Bracket - Manual

Commercial Chase Bracket
Installation Instructions
Bracket can be fastened to vent or stack pipe with stainless
steel band. Although not necessary, additional band can be
used in the slot provided to secure bracket to vertical pipe.
Bracket can also be secured to any flat surface with approved
hardware using two mounting holes provided.
INSTALLATION
Position horizontal piping in the bracket to cradle the water
header then solder copper pipe to the bracket. Heat the pipe,
not the bracket. Maximum load is 275 lbs.
Optional installation allows installer to secure water header by
using a stainless band or cable tie threaded through horizontal
slot then secure band or tie around water header and through
the front channel of the bracket.
www.siouxchief.com 1-800-821-3944 ©2011 Sioux Chief
#IS-521-723 Commercial Chase Bracket Instruction Sheet Rev2 04-11
Patent # D 558,567
Made in USA
521-723 Chase Bracket with s.s. band
521-723B Chase Bracket