Vogels PFW 6856 - Manual (Page 4)

www.vogels.com 9531-060-Z01-01
1
3
2
4 9 8
7 6B
x4 x4
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6856
1/2”/13mm
7
8 9
5/32”
Make sure to keep space between
the bracket and display.
x4 x4 x4
M8 x 16 mm M8 x 20 mm M8 x 30 mm
or or
Remove the two security screws from the right and left side
of the mounting bracket crossbar and slide the two mounting
brackets inside the left and right side security screw hole
and reinstall the two security screws.
Remove the two security screws from the right and left side
of the mounting bracket crossbar and slide the two mounting
brackets inside the left and right side security screw hole
and reinstall the two security screws. Invert the flat panel display and place it on a smooth flat
surface so the back of the display panel is facing up.
Align the two mounting bracket to the four mounting points
on the rear of the display and secure them bracket to the
display with the proper “pitch” supplied hardware. Check the
owners manual to determine correct pitch hardware recom-
mended.