Vogels PFW 6856 - Manual (Page 5)

www.vogels.com 9531-060-Z01-01
1
3
2
4 12 11B
11A 10
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6856
5/32”
CL
x4
Remove the 6mm knurl knob safety screw and set it aside.
Once the mounting brackets are secured to the rear of the
display alighn the round portion of the cross bar so it is on
dead center of the display from left to right side.
Secure the cross bar to the bracket using the four Allen
head screws suppliedv
Invert the flat panel display and place it on a smooth flat
surface so the back of the display panel is facing up.
Align the two mounting bracket to the four mounting points
on the rear of the display and secure them bracket to the
display with the proper “pitch” supplied hardware. Check the
owners manual to determine correct pitch hardware recom-
mended.