Vogels PFW 6870 - Manual (Page 6)

PFW 6870
Page 6 Installation Instructions
Installalation
Introduction
Directional Mounting Arrow
The Directional Mounting Arrow stamped into the
PFW 6870 mount indicates which edge is the top.
Mounting Safety
Two people are recommended to install the
mount.
You must secure the mount to two (2) wall studs
with four (4) lag bolts (2 lag bolts for each stud
found).
1) Use a stud finder to determine the exact center of
wall studs in the vicinity of the mount.
2) Use a pencil to mark the exact center of each of the
wall studs.
Step 1
Step 2
Step 3
Two people are recommended for this step; one
person to level the mount and another person to
mark the wall stud location.
1) Place the mount against the wall in the desired
viewing location.
2) Adjust the mount to align the mount slots in the
mount with the center of the wall studs.
3) Level the mount.
4) Use a pencil to mark the upper right mounting
location along the center of the wall stud.
Drill a “pilot hole” in the center of the upper right mark
using a ¼″ drill bit and power drill.
(Only use a ¼˝ drill bit when drilling pilot holes.)