Vollrath Cayenne Gas Hot Plates - Manual (Page 5)

5 GAS HOT PLATE
WARNING
FIRE, INJURY OR DEATH HAZARD
Have this equipment installed and adjusted by a qualified technician in
accordance with all federal, state and local codes. Failure to install, adjust or
maintain this equipment properly can result in injury or death.
PILOT FLAME REGULATION: The pilot flame on the appliance has been factory
adjusted. When adjustment is necessary, adjust the pilot flames as small as possible,
but high enough to light the burner immediately when burner valve is turned to the
‘High’ setting. Access to the pilot flame adjustment screw is obtained by removing the
front panel.
BURNER ADJUSTMENT: Remove the front panel to gain access. Turn burner valve
knob to ‘High’ position. Slowly decrease mixing ring aperture to give a soft blue flame
having luminous tips, then slowly increase opening to a point where the yellow Tips
disappear and a hard blue flame is obtained.
BURNER OPERATION:
1. To ignite burners, depress and turn burner valve knob to the High position.
2. Adjust the valve set-point to obtain the desired flame height.
Using the Gas Hot Plate:
1. Make sure unit is sitting securely on the work surface and the work area is free
from hazards.
2. Make sure the cooking surface of the unit is free from anything that is not suited
for high heat.
3. Turn temperature dial to the desired heat setting.
Cleaning:
To maintain appearance and increase the service life, the Gas Hot Plate should be
cleaned at least daily.
1. Before cleaning, be sure the unit is turned off.
2. Wipe the entire unit with a clean, damp cloth.
3. Empty and clean the grease drawer daily.
Repair:
There are no user serviceable parts within this flat top Gas Hot Plate. To avoid serious
injury or damage, never attempt to repair yourself. Contact a qualified professional
repair service.