AT&T 5830 - Manual (Page 89)

To Model 5830 Base Unit
1 Make sure to charge the handset battery pack at least 12 hours.
2 At the cordless handset, use the softkey to select NEW.
3 Enter the 15-digit Base Unit ID Code located on the underside of
your Model 5830 base.
4 Use the softkey to select OK. The screen displays PLEASE WAIT!!.
5 After about 45 seconds, the screen displays FOUND BASE. If the
handset displays BASE BUSY TRY LATER, the base is in use.
To Model 5840 Base Unit
1 Make sure to charge the handset battery pack at least 12 hours.
2 At the 5840 corded base, press .
3 Use or to select DISPLAY BASE-ID.
4 Press . The base screen will display the 15-digit Base ID
code for about 30 seconds, then return to the idle screen. Write
down the Base ID code so you can enter it at the handset in
STEP 6 below.
5 At the cordless handset, use the softkey to select NEW.
6 Enter the 15-digit Base ID code.
7 Use the softkey to select . The screen displays PLEASE
WAIT!!.
8 After about 45 seconds, the screen displays FOUND BASE. If the
handset displays BASE BUSY TRY LATER, the base is in use.
For complete operational instructions,
please refer to the manual that came
with your 5840 or 5830 telephone.
OK
OK
MENU
3
REGISTER THE HANDSET REGISTER THE HANDSET
REGISTER THE HANDSET
5800_CIB_1ATT 8/6/02 10:43 AM Page 3