Kodak CX7530 - Manual (Page 46)

Transferring and printing pictures
40 www.kodak.com/go/support
Direct printing with a PictBridge-enabled
printer
Your camera features PictBridge technology, so you can print directly to
PictBridge-enabled printers.
Preparing the camera and printer
To get started, you need:
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare
camera dock or printer dock to power your camera.
Connect the camera to the printer
1 Turn off the camera and printer.
2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug
it into the camera and into an electrical outlet.
3 Using the USB cable that came with your camera, connect the camera to
the printer. (See your printer user guide for details.)
Printing pictures
1 Turn on the printer. Turn the camera Mode dial to Auto.
The PictBridge logo and current picture are displayed. (If you turned the Mode
dial to Favorites, the current favorite picture is displayed.) If the menu interface
turns off, press any button to redisplay it.
2 Press to choose a printing option, then press the OK button.
■ Camera with fully-charged batteries, or
with optional Kodak 3-volt AC adapter ■ PictBridge-enabled printer
■ USB cable included with your camera
Current Picture Print the current picture. Press to choose a different
picture. Choose the number of pictures to print.
Tagged Pictures If your printer is capable, print pictures that you tagged for
printing (see page 35 ) and choose a print size.
Index Print Print thumbnails of all pictures. This requires one or more sheets
of paper. If the printer is capable, choose a print size.
All Pictures Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of pictures to print.
Image Storage Access internal memory, a card, or Favorites.