Camera ready light status – Kodak CX7530 User Manual

Page 54

Advertising
background image

Troubleshooting

48

www.kodak.com/go/support

Camera ready light status

Status

Cause

Solution

Ready light does not turn
on and the camera does
not work.

Camera is not turned on. Turn on the camera

(

page 4

).

Battery is exhausted.

Recharge the battery or install a
new one (

page 2

).

Mode dial was on when
batteries were reloaded.

Turn Mode dial off, then back
on.

Ready light blinks green. Picture is being

processed and saved to
the camera.

Camera is operating normally.

Ready light blinks
orange.

Flash is not charged.

Wait. Resume picture taking
when the light stops blinking
and turns off.

Auto exposure or
auto-focus are not
locked.

Release the Shutter button and
recompose the picture.

Ready light blinks red and
camera turns off.

Battery is low or
exhausted.

Recharge the battery or install a
new one (

page 2

).

Ready light glows steady
red.

Camera’s internal
memory or card is full.

Transfer pictures to the
computer (

page 39

), delete

pictures from the camera
(

page 25

), switch image storage

locations (

page 20

), or insert a

card with available memory
(

page 7

).

Camera processing
memory is full.

Wait. Resume picture taking
when the light turns off.

Card is read-only.

Change image storage location
to internal memory (

page 20

), or

use a different card.

Ready light glows steady
green

Shutter button is pressed
halfway down. Focus and
exposure are set.

Camera is operating normally.

Ready light glows steady
orange

The Mode dial is set to
Favorites.

Camera is operating normally.

Advertising