Kodak DC260 - Manual (Page 100)

9-8
LCD Messages
Problem Cause Solution
Unable to receive picture. An error has occurred
while receiving
pictures in a camera to
camera transfer. Try the camera to
camera transfer again.
Transfer of pictures was
interrupted. Not all pictures
were sent. An error has occurred
before all pictures
were transferred. Try the transfer again.
Not enough memory There is not enough
memory on the card to
store the selected
timelapse picture
sequence. Transfer pictures to
your computer or
insert a memory card
that has available
memory. You can also
change the timelapse
sequence to one that
requires less memory.