Kodak D4000 - Manual (Page 14)

1-10
Setting Up the Printer
12. Insert each cassette until it clicks into place.
13. Rotate the thermal head release lever on the left side (labeled
L1) and/or the right side (labeled R1) up to the locked position.
14. Close the front door.
Making a Test Print
Make a test print to check that the printer is installed and set up
correctly.
1. On the operator panel, press Menu twice until Test Print
Mode appears.
2. Press Enter to start printing the test print.
3. To exit Test Print Mode, press Rewind/Unload until
8x10 YMC-YMC or 8x12 YMC-YMC appears.
For more information on using the operator panel in Setup mode,
see
“Printer Settings” on page 2-3 .
Menu
Enter Rewind/Unload
Advance/Load
3 2
1