Kodak Z710 - Manual (Page 52)

46 www.kodak.com/go/support
Troubleshooting
Picture orientation is
not accurate ■ Set the Orientation Sensor to ON. (See the table that starts on
page 35 .)
Flash does not fire ■ Open the flash unit ( page 9 ).
■ Check the flash setting and change as needed ( page 25 ).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full ■ Transfer pictures to the computer ( page 41 ).
■ Delete pictures from the card ( page 13 ) or insert a new one.
■ Change image storage location to internal memory.
Battery life is short ■ Make sure the correct battery type is installed ( page 57 ).
■ Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■ Insert a new or charged battery ( page 2 ).
You cannot take a
picture ■ Turn camera off, then on again. Make sure the camera is not in
Favorites mode.
■ Press Shutter button all the way ( page 5 ).
■ Insert a new or charged battery ( page 2 ).
■ Wait until the AF/AE indicator turns green before attempting to
take another picture.
■ Memory full. Transfer pictures to the computer ( page 41 ), delete
pictures ( page 13 ), change image storage location, or insert
another card.
Error message appears
on EVF/LCD ■ Turn the camera off, then on again.
■ Remove memory card from the camera.
■ Remove the battery and wipe the contacts with a clean, dry cloth.
■ Insert a new or charged battery ( page 2 ).
■ Get customer support help ( page 49 ).
Memory card not
recognized or camera
freezes with card. ■ Card may be corrupted. Format card in camera. (See Format in
the table that starts on
page 35 .)
■ Change image storage location to internal memory.
If Try one or more of the following