Kodak M1033 - Manual (Page 17)

Taking pictures/videos
www.kodak.com/go/support 11
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 In any Still mode, press until the desired
self-timer icon appears for:
10 seconds—A picture is taken after a 10-second
delay (so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second
delay (for a steady, shutter release on a tripod).
2 shot—The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds later.
2 Compose the scene. Press the Shutter button
halfway, then completely down.
The camera takes the picture/pictures after the delay.
NOTE: In Panoramic modes ( page 34 ), only the 2- and 10-second options are available.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Using burst
Use burst to take up to 3 pictures in quick succession. (Burst is not available in
Panorama mode.)
1 In any picture-taking mode, repeatedly press
until the Burst icon appears at the top of the LCD.
2 Press the Shutter button halfway to focus and set
exposure. Press the Shutter button completely
down and hold it to take pictures.