Kodak M1033 User Manual
Page 53
Troubleshooting
www.kodak.com/go/support
47
Direct printing (PictBridge enabled printer) problems
Picture is too light
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (see
).
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Smart Capture modes, adjust the Exposure Compensation (see
Status
Solution
Cannot find the
desired picture
■
Make sure you’re not in Favorites mode.
■
Use the Direct print menu to change the image storage location.
The Direct print menu
interface turns off
■
Press any camera button to redisplay the menu.
Cannot print pictures
■
Make sure there is a connection between the camera and the
printer (see
■
Make sure the printer and the camera have power.
Camera or printer
display an error
message
■
Follow the prompts to resolve the issue.
Status
Solution