Care and maintenance – Kodak Z812 IS User Manual

Page 67

Advertising
background image

Appendix

www.kodak.com/go/support

61

Orientation sensor—For pictures and video

Video output—NTSC or PAL

Power—Kodak lithium digital camera battery CRV3; Kodak Li-Ion rechargeable
digital camera battery KLIC-8000; AA lithium batteries; 3V AC adapter; EasyShare
docks

Communication with computer—USB (PIMA 15740 protocol) via USB cable
(U-8), EasyShare docks

PictBridge support—Yes

Self-timer—2 seconds, 10 seconds, 2-shot

White Balance—Auto, Daylight, Open Shade, Tungsten, Fluorescent

Color modes—High Color, Natural Color, Low Color, Black & White, Sepia

Date stamp—On, Off

Tripod mount—1/4 inch

Operating temperature—32–104° F (0–40° C)

Size—4.3 x 2.9 x 3 in. (10.8 x 7.4 x 7.6 cm) @ power off

Weight—11.6 oz (330 g) without card or battery

Care and maintenance

■

If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.

■

Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.

■

Service agreements may be available. Contact a dealer of Kodak products.

■

For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at

www.eiae.org

.

Advertising