Kodak P86 - Manual (Page 14)

8 www.kodak.com/go/support
Getting started
Copying pictures to your frame
Copy pictures to your frame’s internal memory from a memory card or USB device.
Each time you insert a card or USB device, press OK and follow the copy directions.
CAUTION:
Do not remove a card or disconnect a device while copying. Your
card, pictures, or device could be damaged.
1 Insert a memory card or USB device (flash drive,
card reader, hard drive).
The pictures start playing. A copy message appears for
15 seconds, “To copy pictures from <inserted source>
to the frame’s internal memory, press OK.”
2 While the copy message is displayed, press OK.
3 Highlight your copy method:
This picture—copy the displayed picture.
All pictures in folder—copy all the pictures in a
folder (folder represents the folder name, if there
are any folders on the inserted card or device).
All pictures in source—copy all of the pictures on
the card or USB device (source represents the type
of card or device that’s inserted in the frame).
4 Press OK.
The slide show plays while pictures are being copied.
NOTE: Copies are automatically resized to a lower resolution (smaller size). Full resolution is unnecessary
for viewing and quickly fills up the frame’s memory.
Copying from internal memory to a memory card or USB device is not supported.
To copy pictures anytime a slide show is playing, with a card or USB device inserted, press OK,
highlight
(Copy), and continue with step 3 above.