Kodak V705 - Manual (Page 54)

48 www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
Battery life is short ■ Make sure the correct battery type is installed ( page 59 ).
■ Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■ Insert a new or charged battery ( page 1 ).
You cannot take a
picture ■ Turn the camera off, then on again. Make sure the camera is not
in Favorites mode.
■ Depress the Shutter button all the way ( page 5 ).
■ Insert a new or charged battery ( page 1 ).
■ Memory is full. Transfer pictures to the computer ( page 42 ),
delete pictures ( page 17 ), change image storage location, or
insert another card.
Error message appears
on LCD ■ Turn the camera off, then on again.
■ Remove the memory card.
■ Turn off the camera. Remove the battery. Wipe the contacts with
a clean, dry cloth.
■ Insert a new or charged battery.
■ If the problem still exists, get help ( page 51 ).
Memory card not
recognized or camera
freezes with card. ■ Card may be corrupted. Format the card in the camera. (See the
“Customizing your camera” table starting on
page 32 .)
■ Use another memory card.
Status Solution
Computer does not
communicate with
the camera ■ Make sure the battery is charged and installed correctly ( page 1 ).
■ Turn on the camera.
■ Make sure the USB cable model U-8 is connected to the camera
and the computer (
page 43 ). (If using an EasyShare dock, check
all cable connections. Make sure the camera is seated on the
dock.)
■ Make sure EasyShare software is installed ( page 42 ).
Status Solution