Kodak V705 User Manual
Page 56
50
www.kodak.com/go/support
Troubleshooting
Direct printing (PictBridge enabled printer) problems
Picture is too light
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (
).
■
Move so that the distance between you and the subject is within the
effective flash range.
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Auto and SCN-Custom modes, adjust the Exposure Compensation
(
Status
Solution
Cannot find the desired picture.
■
Turn on the camera. Make sure the camera is not in
Favorites mode.
■
Use the Direct print menu to change the image
storage location.
The Direct print menu interface
turns off.
■
Press any camera button to redisplay the menu.
Cannot print pictures.
■
Make sure there is a connection between the camera
and the printer (
■
Make sure the printer and the camera have power.
Camera or printer display an error
message.
■
Follow the prompts to resolve the issue.
Status
Solution