Kodak CX6330 - Manual (Page 39)

27
Chapter 2
Pre-tagging for Album Names
Use the Set Album (Still) feature to pre-select album names before you take
pictures. Then, all the pictures you take are tagged with those album names.
First—On Your Computer
Use Kodak EasyShare software, V 3.0 or higher, to create album names on your
computer. Then copy up to 32 album names to the camera’s address book the
next time you connect the camera to the computer. See Kodak EasyShare
software Help for details.
Second—On Your Camera
1 In any Still mode, press the Menu button.
2 Press to highlight Album , then
press the OK button.
3 Press to highlight an album name,
then press the OK button. Repeat to add
pictures to more than one album.
Selected albums are noted with a check
mark.
4 To remove a selection, highlight an album
name and press the OK button. To remove
all album selections, select Clear All.
5 Highlight Exit, then press the OK button.
Your selections are saved. If you turn on
Liveview, your album selection is
displayed on the screen. A plus (+) after
the album name means more than one
album is selected.
6 Press the Menu button to exit the menu.