Kodak M22 - Manual (Page 49)

www.kodak.com/go/support 42
7
Troubleshooting
Camera problems
Status Solution
Camera does not
turn on ■ Make sure the battery is installed correctly ( see page 1 ) and
charged ( see page 2 ). Charge the Li-Ion battery whenever
necessary.
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark. ■ Adjust the LCD Brightness setting ( see page 37 ).
Pictures remaining
number does not
decrease after taking a
picture ■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire ■ Check the flash setting, and change as needed ( see page 11 ).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full ■ Transfer the pictures to the computer ( see page 39 ).
■ Delete pictures from the card ( see page 24 ) or insert a new card.
Battery life is short ■ Make sure the correct battery type is installed ( see page 50 ).
■ Wipe the battery’s contacts with a clean, dry cloth before
inserting it in the camera.
■ Insert a new/charged battery ( see page 1 ). Charge the Li-Ion
battery whenever necessary.
■ Limit the time you review pictures/videos on the camera LCD.
■ Purchase a spare battery at www.kodak.com/go/accessories .