Kodak M22 - Manual (Page 50)

43 www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
Direct printing (PICTBRIDGE enabled printer) problems
Memory card not
recognized or camera
freezes with card ■ Card may be corrupted. Format the card in the camera ( see
page 38 ).
■ Use another memory card. Only SD or SDHC Cards are supported.
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress the Shutter button all the way ( see page 7 ).
■ Insert a new/charged battery ( see page 1 ). Charge the Li-Ion
battery whenever necessary.
■ Memory is full. Transfer pictures to the computer ( see page 39 ),
delete pictures ( see page 24 ), or insert another card.
Status Solution
Slide Show does not
run on an external
display device ■ Adjust the camera Video Out setting to NTSC or PAL ( see
page 37 ).
■ Make sure the external device settings are correct. (See the
device’s user guide.)
Computer does not
communicate with
the camera ■ Turn off the camera, then turn it back on.
■ Make sure the battery is installed correctly ( see page 1 ) and
charged ( see page 2 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (
see page 39 ). Then
turn on the camera.
■ See KODAK Software Help at www.kodak.com/go/camerasw .
Status Solution
Cannot print to a
PICTBRIDGE Printer ■ In the Setup menu, change the Computer Connection setting to
Other Application (
see page 37 ).
Status Solution