Kodak M380 - Manual (Page 48)

42 www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
Battery life is short ■ Make sure the correct battery type is installed ( see page 52 ).
■ Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■ Insert a new or charged battery ( see page 1 ).
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress the Shutter button all the way ( see page 5 ).
■ Insert a new or charged battery ( see page 1 ).
■ Memory is full. Transfer pictures to the computer ( see page 33 ),
delete pictures ( see page 15 ), or insert another card.
Memory card not
recognized or camera
freezes with card ■ Card may be corrupted. Format the card in the camera ( see
page 32 ).
■ Use another memory card. Only SD or SDHC Cards are supported.
Cannot find the
desired picture/video ■ To view pictures on a card or in internal memory, see page 14 .
Status Solution
Pictures do not
transfer to computer ■ See Help in EASYSHARE Software.
Slide Show does not
run on an external
video device ■ Adjust the camera Video Out setting to NTSC or PAL ( see
page 31 ).
■ Make sure the external device settings are correct. (See the
device’s user’s guide).
Computer does not
communicate with
the camera ■ Make sure the battery is charged and installed correctly ( see
page 1 ).
■ Turn on the camera.
■ Make sure the USB cable model U-8 is connected to the camera
and the computer (
see page 34 ).
■ Make sure EASYSHARE Software is installed ( see page 33 ).
Status Solution