Kodak ZD710 - Manual (Page 58)

52 www.kodak.com/go/support
Troubleshooting
Picture orientation is
not accurate ■ Set the Orientation Sensor to ON ( see page 34 )
Flash does not fire ■ Open the flash unit.
■ Check the flash setting and change as needed ( see page 9 ).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full ■ Transfer pictures to the computer ( see page 47 ).
■ Delete pictures from the card ( see page 16 ) or insert a new card.
■ Change image storage location to internal memory ( see
page 33 ).
Battery life is short ■ Make sure the correct battery type is installed ( see page 62 ).
■ Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■ Insert a new or charged battery ( see page 2 ).
You cannot take a
picture ■ Turn camera off, then on again. Make sure the camera is not in
Favorites mode. If prompted, set language and date/time.
■ Press Shutter button all the way ( see page 5 ).
■ Insert a new or charged battery ( see page 2 ).
■ Wait until the AF/AE indicator turns green before attempting to
take another picture.
■ Memory full. Transfer pictures to the computer ( see page 47 ),
delete pictures ( see page 16 ), change image storage location
( see page 33 ), or insert another card.
Error message appears
on EVF/LCD ■ Follow the EVF/LCD prompts.
■ Turn the camera off, then on again.
■ Remove memory card from the camera.
■ Remove the battery and wipe the contacts with a clean, dry cloth.
■ Insert a new or charged battery ( see page 2 ).
■ Get customer support help ( see page 56 ).
If Try one or more of the following