Kodak M863 - Manual (Page 59)

Troubleshooting
www.kodak.com/go/support 53
LCD screen messages
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.) ■ Disconnect the USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (see
page 45 ).
■ Disconnect the USB cable. Close all software applications. Re-install
the software (see
page 45 ).
■ Reboot the computer.
■ Try another computer.
Slide show stops or
does not run on an
external video
device. ■ Adjust the camera Video Out setting NTSC or PAL ( see page 35 ).
■ Make sure the external device settings are correct. (See the device’s
user’s guide.)
If... Try one or more of the following
No pictures or
videos to display ■ Change image storage location setting ( see page 34 ).
Memory card
requires
formatting ■ Insert a new card (see page 4 ) or format the card ( see page 35 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Memory card
cannot be read
(Please format
memory card or
insert another
card)
Only one USB
connection
allowed.
Disconnect cable
or rem. (remove)
camera from dock.
■ Unplug the USB cable from the camera.
If... Try one or more of the following