Kodak M5350 - Manual (Page 52)

46 www.kodak.com/go/support
7
Troubleshooting
Camera
Status Solution
Camera does not
turn on/off or function ■ Make sure the battery is charged and installed correctly ( see
page 1 ).
LCD is too dark. ■ Adjust the LCD Brightness setting in the Settings menu ( see
page 41 ).
Short battery life ■ Make sure the battery is charged ( see page 1 ).
■ Limit the time you review pictures/videos on the camera LCD.
■ Purchase a spare battery at www.kodak.com/go/accessories .
Flash does not fire ■ The flash does not fire in all modes. Change modes as needed
(
see page 14 ).
Memory card is almost
or entirely full ■ Transfer the pictures to the computer ( see page 43 ).
■ Delete pictures from the card ( see page 22 ) or insert a new card.
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress the Shutter button all the way ( see page 8 ).
■ Insert a new/charged battery ( see page 1 ).
■ Memory is full. Transfer pictures to the computer ( see page 43 ),
delete pictures ( see page 22 ), or insert another card.
Pictures remaining
number does not
decrease after taking a
picture ■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Memory card not
recognized or camera
freezes with card ■ Card may be corrupted. Format the card in the camera ( see
page 42 ).
■ Use another memory card. Only SD or SDHC Cards are supported.